Electrical guide

What Size Inverter and Battery Do You Need for Load Shedding?

When the power goes off, a backup system is only as good as its sizing. If the inverter is too small, it trips the moment the fridge and the microwave run together. If the battery is too small, the lights go out halfway through the evening. This guide explains, in plain English, how to work out the right inverter and battery size for a Pretoria home, what to put on backup and what to leave off, and why the wiring matters just as much as the equipment.

Inverter and battery size: two different questions

People often talk about “a 5 kVA system” as if that tells the whole story. It doesn’t. A backup system has two parts, and each one answers a different question:

  • The inverter decides how much you can run at the same time. It is rated in kVA or kW. Think of it as the width of the pipe.
  • The battery decides how long you can run it. It is rated in kWh (kilowatt-hours). Think of it as the size of the tank.

The right system matches both to the way your household actually uses power during an outage.

Step 1: Decide what must keep running

Start with a list of the things you really need when the power is off. For most Pretoria homes, that looks something like this:

  • LED lights in the main rooms
  • Fridge and freezer
  • Wi-Fi router, fibre box and phone chargers
  • TV and decoder
  • Laptops or a home office computer
  • Alarm system, electric fence energiser and outside security lights
  • Gate motor, if its own battery isn’t enough for a long outage

Then list what should not go on the inverter: the geyser, kettle, heaters, air-conditioners, tumble dryer, dishwasher and the pool pump. These heavy loads can drain a battery in a short time, or trip the inverter outright. They stay on the normal circuits and simply wait for the power to come back.

Step 2: Add up the watts to size the inverter

Look at the label on each appliance, or check the manual, for its power in watts. Add up everything that could realistically be on at the same time. As a rough guide:

  • LED light: 5 to 10 W each
  • Wi-Fi router and fibre box: 15 to 30 W together
  • TV and decoder: 80 to 150 W
  • Laptop: 50 to 90 W
  • Fridge or freezer: 100 to 250 W while running, but a few times more for a moment when the compressor starts

Motors such as fridges, freezers and pumps need a short burst of extra power to start. So don’t size the inverter to your total running load exactly. Leave 25 to 30 percent headroom, and more if you want to run a pump.

In practice, a home that only backs up lights, the fridge, Wi-Fi, TV and the alarm usually does fine with a 3 kVA to 3 kW inverter. A family home that also wants a microwave (1,000 to 1,500 W), a home office and a borehole or pool pump on backup is more comfortable at 5 kW. Larger homes, or homes adding solar panels, often go bigger.

Step 3: Work out the battery size

Battery size is simple maths: average load (kW) x hours of backup = energy needed (kWh).

Say your essentials use about 600 watts on average and you want 4 hours of backup. That is 0.6 kW x 4 hours = 2.4 kWh. Then allow for how much of the battery you can actually use:

  • Lithium (LiFePO4) batteries can safely use about 80 to 90 percent of their rated capacity.
  • Lead-acid batteries should only be drained to about half, otherwise they wear out quickly.

So for 2.4 kWh of real use, a lithium battery of about 3 kWh is the minimum, and a 5 kWh battery gives you a comfortable margin for longer outages and for the battery ageing over time. With lead-acid you would need roughly 5 kWh of battery for the same job.

Planning to run through the night or add solar panels? Size up. Our solar power and battery backup page explains how panels, inverter and battery work together.

Step 4: Get the wiring right

How the system is wired into your home decides whether it is safe and works the way you expect.

  • An essentials circuit. The usual approach is to split your distribution board so that only the chosen circuits run from the inverter.
  • Proper changeover. The inverter must never feed power back into the municipal supply.
  • Earthing and protection. The inverter, battery and any panels need correct earthing, the right breakers and isolators.
  • Surge protection. Power coming back after an outage, and Highveld lightning storms, can damage an expensive inverter. Fitting surge protection at the DB board is worth doing at the same time.
  • Compliance. The installation must meet SANS 10142, and any system connected to your home’s wiring needs a Certificate of Compliance. If the system can connect to the grid, check the City of Tshwane’s registration requirements as well.

If your DB board is old, full, or still has outdated breakers, it may need work before an inverter can be added safely. Older homes with tired wiring are also worth checking first: see our guide to rewiring older homes.

Pumps, gates and other special loads

Borehole pumps and pool pumps have strong start-up surges. A pool pump usually stays off the backup, but many Pretoria homes want the borehole pump running during an outage so there is still water. That needs a bigger inverter and a planned circuit. Our pool and borehole pump page covers the electrical side of pumps.

Gate motors normally have their own small battery. If it runs flat in long outages, a new gate battery is often a better fix than a bigger inverter. See gate motors and security lighting.

Frequently asked questions

What size inverter do I need to run a fridge, lights and TV?

For a fridge, LED lights, a TV, Wi-Fi and a few chargers, the running load is usually well under 1 kW. A 3 kVA or 3 kW inverter handles that comfortably and leaves room for the fridge’s start-up surge. Add up your own appliances first, because every home is different.

How long will a 5 kWh battery last?

Divide the usable battery capacity by your load. A lithium battery that can safely use about 4.5 kWh, running 600 watts of essentials, lasts roughly 7 hours. Run 1,500 watts and it lasts about 3 hours. Older lead-acid batteries give you much less usable energy for the same size.

Can I run my geyser on an inverter?

Normally no. A geyser element draws 3 to 4 kW for long periods and would drain a typical home battery very quickly. Keep the geyser on its own circuit off the backup, and use a timer or solar geyser solution instead.

Can I just plug my inverter into a wall socket?

No. Feeding power back through a plug point is dangerous for you and for anyone working on the lines. An inverter must be wired into the distribution board with proper changeover, earthing and protection, and the installation must comply with SANS 10142.

Get your backup sized and installed properly

Electrician Worx has been helping homes and businesses across Pretoria and Centurion since 2014. Our qualified electricians look at what you actually need to keep running, check your DB board and wiring, and do neat, quality work to SANS 10142, so your backup system is safe and does its job when the power goes off. You can also browse all our electrical services.

Call 012 383 2011 to make an appointment (Monday to Friday, 08:00 to 16:00), or visit our contact page.

Need help with this at home?

Call us to make an appointment. We’ll book a time for a qualified electrician to come out to your home or business.

Call to make an appointment 012 383 2011

Monday to Friday, 08:00–16:00

Call 012 383 2011 to book